Datacom-systems J Class Manual de usuario descargar pdf (Pagina 167)

B-39

 

 

Figure A–21. CPU Assembly Orientation

7. Refer to the Position Guide on the CPU board that states,

“<–– POSITION MEM MODULE AS SHOWN,” as shown in

Figure A–21.

8. Install pairs of SIMMs in the following order: Pair 1 (0A, 0B),

Pair 2 (1A, 1B), Pair 3 (2A, 2B), and so on.

This workstation has 16 memory slots, labeled 0A, 0B through

7A, 7B. Memory can be configured from 32 MB to 256 MB

installed in pairs of 16 MB SIMMs. Memory can be configured

from 128 MB to 768 MB (128 MB to 1 GB if you are running

HP-UX 10.0), installed in pairs of 64 MB SIMMs, or memory

can be configured from 32 MB to 768 MB (1 GB if you are run-

ning HP-UX 10.0) in combinations of pairs of 32 MB and 128

MB SIMM pairs. Memory SIMMs must be installed in pairs of

equal size, with 128 MB SIMM pairs installed first, followed by

32 MB SIMM pairs. Figure A–22 gives the recommended order

for installing pairs of SIMMs.

1 2 ... 162 163 164 165 166 167 168 169 170 171 172 ... 272 273

Sin comentarios

Datacom-systems J Class Manual de usuario Pagina 167